The Wedi Fundo Riolito Neo Modular System consists of two components - NEW Click and Seal Lineat Drain Module and an Extension Module, featuring a one-way slope with close-to-wall drain placement.  It consists of two basic elements: a rectangular module with an integrated trench/linear drain, and a much larger sloped extension panel. Drainage can be installed close to the wall or you can use two extension modules, each leading away from either side with a centered drain module. Each module is made of Wedi's propriety 100% waterproof XPS foam and sanded resin coating.

Wedi Fundo Riolito Shower System Features:

• Riolito Base (Curbless): single-piece base featuring a 4-way slope design and level perimeter for safe recessing into a subfloor construction.
• Riolito Modular Base (Curbed): consists of two components - line drain module and extension module, featuring a one-way slope with close-to-wall drain placement.

Wedi Click and Seal Drain Unit Features:

• Commercial grade, solid drain body
• Fundo Click and Seal Drain fits all Fundo Shower Bases
• Drain Assembly included with every Fundo shower base or kit
• Drain cover can move both vertically and laterally to accommodate any size of tile
• Drain cover can be selected a la carte, but standard cover remains included with Kits
• Drain is equipped with extra weep holes for faster draining of water from thinset mortar layer
• Hair strainer now included in the drain assembly
• Fast, clean, and simple installation
• No plumbing license, glue, or sealant needed
• "Click" sound as checkpoint marks visible from the top view into the drain confirm the drain has properly sealed to Wedi Base.
• Seals to ABS, PVC, or cast iron waste pipe- even on drain/floor pipes up to 5° out of plumb
• A special kit is available to seal to copper pipe
• Can be cleanly and safely disassembled and reassembled, if plumbing needs to be replaced

Note: The Wedi Fundo Click and Seal Height Adjustment Kit sold separately. The Drain Cover Exention only works for Wedi’s finished surface drain covers, but not with Wedi’s tileable covers due to their special water drainage design.

Here is how you select the right shower base size to fit the job in most cases:

Determine the distance between the center of the 2-inch pipe in the subfloor to all framed walls and where you plan to have the inside of a Wedi Curb (as if it were another framed wall). Next, take note of the longest dimension of the two distances measured along each axis (east/west and north/south.)

You will need to select a shower base that covers twice the length of the longest dimensions along each axis. This will ensure that the shower base will cover the entire shower area and, if needed, can be trimmed on-site to position the integrated wedi drain over the 2-inch waste pipe in the subfloor.

This method of calculating the correct shower base works for square and rectangular spaces with a mostly centered drain location. Where drains are very close to a wall, one of our off-center drain bases should be used if possible. Refer to the Wedi Technical Drawings section to select the correct base that covers your shower dimensions, and will properly align the integrated Wedi drain with the floor drain pipe.

This kit includes the shower base and the drain unit, however, it does not come with the shower drain cover. 

New models: Click and Seal Drain Assembly included with Riolito neo Line Modules. Riolito Cover Plates sold separately. Wedi Fundo Riolito Modular Extension Module part numbers and product design have not changed. Fundo Click and Seal Drain fits all Fundo shower bases. Fast, clean, and simple installation.